Single Mode Backbone Network Outdoor 52 Core Fibre Optics Cable GYTA53
| Item | Unit | Specification |
| Fiber Type | G. 652 |
| Mode field diameter | 1310nm | mm | 9.2 ± 0.4 |
| 1550nm | mm | 10.4 ± 0.8 |
| Cladding diameter | mm | 125.0 ± 1 |
| Cladding non-circularity | % | £1.0 |
| Core/cladding concentricity error | mm | £0.5 |
| Coating diameter | mm | 242 ± 7 |
| Coating/cladding concentricity error | mm | £12 |
| Cable cut-off wavelength | nm | £ 1260 |
| Attenuation Coefficient | 1310nm | dB/km | £0.36 |
| 1550nm | dB/km | £0.22 |
| Proof stress level | kpsi | ≥100 |
| Item | Unit | Specification |
| Fiber Type | G. 657A1 |
| Mode field diameter | 1310nm | mm | 8.6-9.5 ± 0.4 |
| Cladding diameter | mm | 125.0 ± 0.7 |
| Cladding non-circularity | % | £1.0 |
| Core/cladding concentricity error | mm | £0.5 |
| Coating diameter | mm | 245 ± 5 |
| Coating/cladding concentricity error | mm | £12 |
| Cable cut-off wavelength | nm | £ 1260 |
| Attenuation Coefficient | 1310nm | dB/km | £0.36 |
| 1550nm | dB/km | £0.22 |
| Macro-bend loss (1 turn, 10mm radius) | 1550nm | dB/km | £0.75 |
| 1625nm | dB/km | £1.5 |
| Proof stress level | kpsi | ≥100 |
| Item | Unit | Specification |
| Fiber Type | G. 657A2 |
| Mode field diameter | 1310nm | mm | 8.6-9.5 ± 0.4 |
| Cladding diameter | mm | 125.0 ± 0.7 |
| Cladding non-circularity | % | £1.0 |
| Core/cladding concentricity error | mm | £0.5 |
| Coating diameter | mm | 245 ± 5 |
| Coating/cladding concentricity error | mm | £12 |
| Cable cut-off wavelength | nm | £ 1260 |
| Attenuation Coefficient | 1310nm | dB/km | £0.36 |
| 1550nm | dB/km | £0.22 |
| Macro-bend loss (1 turn,7.5mm radius) | 1550nm | dB/km | £0.5 |
| 1625nm | dB/km | £1.0 |
| Proof stress level | kpsi | ≥100 |
| Item | Unit | Specification |
| Fiber Type | OM1 |
| Core diameter | mm | 62.5±2.5 |
| Cladding diameter | mm | 125.0 ± 1.0 |
| Cladding non-circularity | % | £1.0 |
| Core/cladding concentricity error | mm | £1.5 |
| Coating diameter | mm | 245 ± 10 |
| Coating/cladding concentricity error | mm | £12 |
| Bandwidt | 850nm | MHz·km | ≥ 160 |
| 1300nm | MHz·km | ≥ 500 |
| Attenuation Coefficient | 850nm | dB/km | £3.5 |
| 1300nm | dB/km | £1.5 |
| Proof stress level | kpsi | ≥100 |
| Item | Unit | Specification |
| Fiber Type | OM2 |
| Core diameter | mm | 50±2.5 |
| Cladding diameter | mm | 125.0 ± 1.0 |
| Cladding non-circularity | % | £1.0 |
| Core/cladding concentricity error | mm | £1.5 |
| Coating diameter | mm | 245 ± 10 |
| Coating/cladding concentricity error | mm | £12 |
| OFL Bandwidth | 850nm | MHz·km | ≥ 500 |
| 1300nm | MHz·km | ≥ 500 |
| Attenuation Coefficient | 850nm | dB/km | £3.5 |
| 1300nm | dB/km | £1.5 |
| Proof stress level | kpsi | ≥100 |
| Item | Unit | Specification |
| Fiber Type | OM3 |
| Core diameter | mm | 50±2.5 |
| Cladding diameter | mm | 125.0 ± 1.0 |
| Cladding non-circularity | % | £1.0 |
| Core/cladding concentricity error | mm | £1.5 |
| Coating diameter | mm | 245 ± 10 |
| Coating/cladding concentricity error | mm | £12 |
| OFL Bandwidth | 850nm | MHz·km | ≥ 1500 |
| 1300nm | MHz·km | ≥ 500 |
| Attenuation Coefficient | 850nm | dB/km | £3.5 |
| 1300nm | dB/km | £1.5 |
| Proof stress level | kpsi | ≥100 |
| Item | Unit | Specification |
| Fiber Type | OM4 |
| Core diameter | mm | 50±2.5 |
| Cladding diameter | mm | 125.0 ± 1.0 |
| Cladding non-circularity | % | £1.0 |
| Core/cladding concentricity error | mm | £1.5 |
| Coating diameter | mm | 245 ± 10 |
| Coating/cladding concentricity error | mm | £12 |
| OFL Bandwidth | 850nm | MHz·km | ≥ 3500 |
| 1300nm | MHz·km | ≥ 500 |
| Attenuation Coefficient | 850nm | dB/km | £3.5 |
| 1300nm | dB/km | £1.5 |
| Proof stress level | kpsi | ≥100 |
| Fiber count | Structure | Fibers per tube | Loose tube diameter
(mm) | CSM diameter/pad diameter
(mm) | Nominal Thickness of outer jacket
(mm) | Cable diameter
(mm) | Cable weight
(kg/km) |
| 4 | 1+5 | 4 | 1.7 ±0.1 | 1.4/1.4 | 1.6 | 9.0 ±0.5 | 93 |
| 6 | 1+5 | 6 | 1.7 ±0.1 | 1.4/1.4 | 1.6 | 9.0 ±0.5 | 93 |
| 8 | 1+5 | 4 | 1.7 ±0.1 | 1.4/1.4 | 1.6 | 9.0 ±0.5 | 93 |
| 12 | 1+5 | 6 | 1.7 ±0.1 | 1.4/1.4 | 1.6 | 9.0 ±0.5 | 94 |
| 18 | 1+5 | 6 | 1.7 ±0.1 | 1.4/1.4 | 1.6 | 9.0 ±0.5 | 94 |
| 24 | 1+5 | 6 | 1.7 ±0.1 | 1.4/1.4 | 1.6 | 9.0 ±0.5 | 95 |
| 30 | 1+5 | 6 | 1.7 ±0.1 | 1.4/1.4 | 1.6 | 9.0 ±0.5 | 95 |
| 36 | 1+6 | 6 | 1.7 ±0.1 | 2.0/2.0 | 1.6 | 9.7 ±0.5 | 119 |
| 48 | 1+5 | 12 | 2.0 ±0.1 | 1.4/1.4 | 1.6 | 9.7 ±0.5 | 108 |
| 60 | 1+5 | 12 | 2.0 ±0.1 | 1.4/1.4 | 1.6 | 9.7 ±0.5 | 109 |
| 72 | 1+6 | 12 | 2.0 ±0.1 | 2.0/2.0 | 1.6 | 10.4 ±0.5 | 132 |
| 84 | 1+7 | 12 | 2.0 ±0.1 | 1.8/2.9 | 1.6 | 11.3 ±0.5 | 146 |
| 96 | 1+8 | 12 | 2.0 ±0.1 | 1.8/3.5 | 1.6 | 12.0 ±0.5 | 160 |
| 108 | 1+9 | 12 | 2.0 ±0.1 | 1.8/4.2 | 1.6 | 12.7 ±0.5 | 176 |
| 120 | 1+10 | 12 | 2.0 ±0.1 | 1.8/4.9 | 1.6 | 13.4 ±0.5 | 192 |
| 132 | 1+11 | 12 | 2.0 ±0.1 | 1.8/5.5 | 1.6 | 14.0 ±0.5 | 207 |
| 144 | 1+12 | 12 | 2.0 ±0.1 | 1.8/6.3 | 1.6 | 14.8 ±0.5 | 226 |
| 192 | 1+6+12 | 12 | 2.0 ±0.1 | 2.2/2.2 | 1.6 | 14.7 ±0.5 | 237 |
| 216 | 1+6+12 | 12 | 2.0 ±0.1 | 2.2/2.2 | 1.6 | 14.7 ±0.5 | 239 |
| 288 | 1+9+15 | 12 | 2.0 ±0.1 | 2.2/4.2 | 1.6 | 16.7 ±0.5 | 297 |
| Item | Parameters |
| Loose tube | Material | PBT |
| Color | Full color spectrum |
| Filler | Material | PE |
| Color | Black |
| CSM | Material | Phosphating steel wire |
| Outer jacket | Material | LSZH |
| Color | Black |
| Min. bending radius | Static | 10 times cable diameter |
| Dynamic | 20 times cable diameter |
| Repeating bending | Load:150N;number of cycles:30 No obvious addition attenuation, no fiber break and no cable damage. |
| Tensile performance | Short term | 1500N |
| Crush | Short term | 1000N/100mm |
| Torsion | Load:150N; number of cycles:10; twist angle:±180° No obvious addition attenuation, no fiber break and no cable damage. |
| Impact | Impact energy:450g×1m; radius of hammer head:12.5mm; number of impact: 5 No obvious addition attenuation, no fiber break and no cable damage. |
| Item | Standard | Parameters |
| Operation temperature | IEC 60794-1-2 F1 | -20ºC~+60ºC |
| Cable type | Drum |
| Height (mm) | Width (mm) | Inner diameter (mm) | Length(km) | Drum type |
| GYTZA-4 | 750 | 760 | 350 | 2 | Plywood wood drum |
| GYTZA-6 | 750 | 760 | 350 | 2 | Plywood wood drum |
| GYTZA-8 | 750 | 760 | 350 | 2 | Plywood wood drum |
| GYTZA-12 | 750 | 760 | 350 | 2 | Plywood wood drum |
| GYTZA-18 | 750 | 760 | 350 | 2 | Plywood wood drum |
| GYTZA-24 | 750 | 760 | 350 | 2 | Plywood wood drum |
| GYTZA-30 | 750 | 760 | 350 | 2 | Plywood wood drum |
| GYTZA-36 | 800 | 760 | 400 | 2 | Plywood wood drum |
| GYTZA-48 | 800 | 760 | 400 | 2 | Plywood wood drum |
| GYTZA-60 | 800 | 760 | 400 | 2 | Plywood wood drum |
| GYTZA-72 | 850 | 760 | 400 | 2 | Plywood wood drum |
| GYTZA-84 | 900 | 760 | 400 | 2 | Plywood wood drum |
| GYTZA-96 | 950 | 760 | 400 | 2 | Plywood wood drum |
| GYTZA-108 | 950 | 760 | 400 | 2 | Plywood wood drum |
| GYTZA-120 | 1000 | 760 | 400 | 2 | Plywood wood drum |
| GYTZA-132 | 1100 | 760 | 400 | 2 | Plywood wood drum |
| GYTZA-144 | 1200 | 760 | 500 | 2 | Iron wood tray |
| GYTZA-192 | 1200 | 760 | 500 | 2 | Iron wood tray |
| GYTZA-216 | 1200 | 760 | 500 | 2 | Iron wood tray |
| GYTZA-288 | 1250 | 760 | 500 | 2 | Iron wood tray |
Guangdong Juxianlan Communication Co., Ltd. Was established in 2014 and specializing in manufacturing fiber optic products and providing fiber optic solutions and engineering services in Guangdong, China.
As a professional cable manufacturer, we are committed to providing customers around the world with comprehensive products, the latest technology, and professional services to help customers to build a high-quality network platform. Combining with the actual needs of customers, we are providing individualized and comprehensive solutions to meet customers′ demands.
We offer the whole range of equipment for fiber optic, Telecom (FTTH, 4G/5G Mobile Stations, etc. ), Ethernet, and CATV network. Each unit of our products will go through 3 QC procedures: Material checking before production, stability and performance testing after production and packing checking before delivery.
Currently, most of our products have been exported to Europe, Russia, and South America. Welcome numerous agents, integrated dealers, and equipment producersall over the world to cooperate with us, to the greatest extent possible to meet your needs.
FAQ:
Are you a factory or trade company?
JXL fiber is a the real factory meanwhile we are listed company
What is your main product?
Outdoor fiber optic cables; indoor fiber optic cables;FTTH Drop cables; ADSS;
Indoor armored patch cords fiber cable; Optical patch cords SC/LC/FC/ST; MTP/MPO optical patch cord.
Product quality guarantee period?
25 years' Guarantee for fiber optic cable
Do you have certificate for raw material?
We build long-term relationship cooperation with qualified ISO9001, ROHS raw material suppliers.
What is your delivery time?
Within 24 hours for 50KM normal kinds of fiber optic cable;
1 ~2 working days for fiber optic patch cords with 10000 connectors.
MOQ: what is your minimum quantity?
MOQ for fiber optic cables: 1KM
There is no MOQ required for fiber optic patch cords,as there's stock for normal kinds.
Payment
For large orders: T/T, L/C
For small orders: T/T,Western Union and Paypal are acceptable.
Shipping & Delivery
Normal orders: shipped by sea
Sample orders: by sea , by air
Welcome to Send us Inquiry on Belowing Table. Start Your Project Today.
